Products - Industrial

Room Temperature Clear Lam Resin

This is a high quality, general purpose unfilled epoxy resin system used with glass or organic fabrics for lamination and bonding applications. It is a room temperature curing system used with glass or organic fabrics for lamination and bonding applications. It is a room temperature curing system for use at ambient conditions. It has a moderate pot life along with excellent physical properties and dimensional stability, making it well suited for automotive and aerospace requirements.

High Temperature Laminating Resin

Our High Temp Epoxy resin is a two component, nonstaning system with excellent properties for the construction of dimensionally stable tools and parts. This system combines good cloth wet-out with good non run-out properties. It will initially cure at room temperature at allow de-molding. High Temperature properties are obtained after some post curing at temperatures from 150ºF to 350ºF. This is an aluminum filled system.

Room Temperature Surface Coat

This is a two component light bodied surface coat system designed for use in all applications that require exacting duplication of detail. It's excellent thixotopy enables it to stay in place on a vertical surface and provides superior edge coverage over sharp radius. It has excellent handling properties going on smooth and evenly without drag on brush.

High Temperature Surface Coat

Room Temperature White Laminating Resin

Our room temp white laminating resin is a long pot life general purpose, low toxicity, white epoxy resin system designed specifically for use with glass or organic fabrics for lamination and bonding applications. This product exhibits a combination of excellent cloth or mat wet out with good non run-out properties.

Clear Casting Silicone

High Temperature Aluminum Filled Casting Resin

This casting resin is a versatile high temperature, aluminum filled, low-setting epoxy system that provides the choice of room temperature or elevated heat cure in the accurate construction of dimensionally stable high temperature tools. These tools can be used continuously at 320oF and easily withstand intermittent temperatures of 350oF to meet the requirements necessary for a wide range of tooling applications. This resin may be cast in thicknesses up to 1 1/2 inches. The geometry of the cast and the insulating qualities of the master must always be considered when determining the maximum volume that may be poured.